70 mm systems EuroFutur Classic double seal with ventilation system KöClimat plus

There are a large number of cases where the conventional ventilation methods are inadequate, e.g. when you are not at home. This also applies to weekend and holiday homes. Here the KÖMMERLING ventilation system KöClimat plus provides for fresh air – also without active ventilation. The KÖMMERLING ventilation system is the perfect solution for a healthy indoor climate at all times, also when the windows are closed.

For this reason it is important that a healthy balance is reached between a sensible ventilation behaviour and the minimum heat loss. This safeguards on the one hand sustainable energy consumption, on the other the integrity of the building fabric that would otherwise suffer from the effects of moisture.

KöClimat plus from KÖMMERLING is your ventilation solution for a regulated supply of fresh air – and that fully automated, even without active ventilation.

Fitted with a double-stage wind pressure regulator, KöClimat plus contributes to a healthy living climate and is easy to clean. The fan features an innovative return spring and does not need a power supply. It can be installed either horizontally or vertically in the window. This safeguards on the one hand sustainable energy consumption, on the other the integrity of the building fabric that would otherwise suffer from the effects of moisture. KöClimat from KÖMMERLING is your ventilation solution that provides a uniform supply of fresh air.

  • Provides for a constant, uniform supply of fresh air.
  • Minimises high air humidity and therefore the risk of mould formation.
  • For horizontal and vertical installation.
  • Simple retrofit on windows with 70 mm construction depth.
  • Concealed in the outer frame rebate, so invisible from the inside and outside when the window is closed.
  • Easy to clean.
  • Tested sound insulation up to 42 dB (Class 4).
  • Protection against driving rain and passage of air tested in accordance with DIN and EU standards.
  • Ventilation in accordance with DIN 1946-6.